MG-4 ocelový bronzový prášek se samomazným ložiskem z PTFE/vlákna
MG-4 ocelový bronzový prášek se samomazným ložiskem z PTFE/vlákna
Ocelový bronzový prášek Marginal Bearing mg-4 se samomazným ložiskem z ptfe/vlákna Specializovaný výrobce samomazných ložisek a pouzder, společnost Marginal Bearing, která byla založena v roce 2010, se věnuje vývoji a výrobě nových materiálů pro samomazná ložiska.
Suitable for dry running, low coefficient of friction, lower wear,good slidingcharacteristics,the transfer film
created can protect the mating metal surfaces, suitable for rotating and oscillating movement, high chemical resistance, low absorption of water and swelling. The CSB-40 improved the friction and much good wear resistance over the common CSB-50 range under lubricated operation.
◆ Technical Data:
| Technical Data | ||
| Max.load | Static | 250 N/mm |
| Very low speed | 140N/mm | |
| PV (dry running) Max. | Roatating oscillating | 30N/mm |
| Short-term operation | 3.6N/mm2·m/s | |
| Continuous operation | 1.8N/mm ·m/s | |
| Temp. limit | -195℃~+280℃ | |
| Friction coenncient | 0.02~0.20 | |
| Max. speed | Dry running | 2m/s |
| Hydrodynamic operation | >2m/s | |
| Thermal conductivity | 42 W(m·k)-1 | |
| Coenncient of thermal expansion | 11×10 ·K | |
omlouvám se, teď nejsou žádné informace!
CSB-40 is developed for high duty, oil lubricated, hydraulic applications...Automotive suspension
struts，shock absorbers guide bushing, hydraulic cylinders, gear pumps, motors, axial and radial piston pumps & motors.CSB-40 is designed mainly for using under lubricated conditions and it performs excellent wear resistance and low static/dynamic friction coefficient.
