-,-,-,MG-1 6570,MG-1 6560,MG-1 6550,MG-1 6540,MG-1 6530,-,-
Hot Tags: ložiska epb, Čína, výrobci, dodavatelé, továrna, velkoobchod, přizpůsobené, koupit, ceník, ceník, skladem, vzorek zdarma, pouzdra hydraulických kluzných ložisek, ložiska epb, samomazná ložiska vinutá vlákna, ocel s ložisky z vláknité tkaniny, okrajová pouzdra pb, válcová pouzdra pb
MG-1 ocelový bronzový prášek se samomazným ložiskem z PTFE/vlákna
MG-1 carbon steel self-lubricating bearing uses high quality low-carbon steel plate as backing, sintered porous bronze as its interlayer and the compound of PTFE as its surface. It o ers the property of good self-lubrication, low wear, low friction, good sliding characteristics, low noise etc. It is widely applied in a various mechanical mating parts.
◆ Features
Suitable for dry running with a low coefficient of friction,low wear rate, good sliding characteristics, the transfer film created will protect the mating metal surface.
Suitable for rotary and oscillating movement, high chemical resistance, lower absorption of water and
reduced swelling. Also performs well with lubrication.
◆ Material Structure:
1. PTFE with mixture 0.01~0.03mm
2. Porous bronze 0.2~0.35mm
3. Steel backing 0.7~2.3mm
4. Tin-plating 0.005mm or copper plating 0.008mm
◆ Technical Data:
| Technical Data | ||
| Max.load | Static | 250 N/mm |
| Very low speed | 140N/mm | |
| PV (dry running) Max. | Roatating oscillating | 60N/mm |
| Short-term operation | 3.6N/mm2·m/s | |
| Continuous operation | 1.8N/mm ·m/s | |
| Temp. limit | -195℃~+280℃ | |
| Friction coenncient | 0.02~0.20 | |
| Max. speed | Dry running | 2m/s |
| Hydrodynamic operation | >2m/s | |
| Thermal conductivity | 42 W(m·k)-1 | |
| Coenncient of thermal expansion | 11×10 ·K | |
- Length
-
6 :-
-
8 :-
-
10 :MG-1 6530
-
12 :MG-1 6540
-
15 :MG-1 6550
-
20 :MG-1 6560
-
25 :MG-1 6570
-
30 :-
-
40 :-
-
50 :-
-
Shaft(f7) (mm) :65
-
Tolerance :-0.060 -0.030
-
Housing (H7) :70
-
Tolerance :+0.030
-
OD :70
-
Tolerance :+0.100 +0.055
-
ID After fixed Di,a :65.110 64.990
-
Clearance DD :0.170 0.020
-
Wall thick- ness S3 :2.505 2.460
